Products

SILICONE ELASTOMER FIBER GLASS TAPE

THICKNESS (mm)	0.15	0.18	0.25
TOLERANCE (mm)	± 0.015	± 0.02	± 0.02
WIDTH	As per requirement	As per requirement	As per requirement
TENSILE STRENGTH (kg/cm)	8	8	12
BDV (KV)	4.5	6	7.5
WATER ABSORPTION (Max.)	1%	1%	1%
VOLUME RESISTIVITY (ohm.cm)	6 x 10 12	6 x 10 12	6 x 10 12
CLASS OF INSULATION	H	H	H
CREASE RESISTANCE	Excellent	Excellent	Excellent
TEST METHOD :	IEC 60394.2

APPLICATION :
Where good flexibility, very low water absorption, fire retardancy, moderate corona resistance required, Insulation of joints, interconnections in electric motors. Submarine, navy cables & Fire survival Cables, Traction Motors & collieries motors where high starting loads and greater switching frequency is required.

ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GUARANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.