Products POLYIMIDE KAPTON* ADHESIVE TAPE (POLYAD) MATERIAL POLYAD tape has Polyimide Film backing coated with silicone adhesive TEST I II THICKNESS (mm)  0.06 0.085 BACKING THICKNESS (mm) nominal 0.025 0.05 WIDTH (mm) ± 0.5 ± 0.5 BREAKING LOAD (KG/ CM) 4.5 9 BDV (KV)  5 10 ELONGATION % 50 50 ADHESIVE STRENGTH GMS/CM 200 200 CLASS OF INSULATION 200 200 ADHESIVE SILICONE SILICONE TEST METHOD IEC 60454:2 * Kapton is registered trade mark of M/s EIA Dupont USA.  APPLICATION Suitable for splicing in very high temp and high stress conditions like high voltage motors, traction motors. It is also used for masking purpose. ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GUARANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.

............................................................................................................................................................................................................................. Conducting Fleece Tape | Consolidation Tape | Conducting Varnish | Epo Nomex Paper | Epoxy Resin Loaded Fleece | Finishing Varnish 5410 | Finishing Varnish Fv 5450 | Pluritubular Gauntlet | Polyimide Kapton* Adhesive Tape | Polyester Adhesive Tape | Ptfe Coated Glass Fabric| Self Fusing Silicone Rubber Tape | Semi Conducting Tape | Silicone Cable | Silicone Elastomer Fiber Glass Tape | Silicone Elastomer Glass Sleeve | Siliconised Polyester Film | Terelene Braided Cord | Woven Polyester Tape