 Products
MAIN CHARACTERISTICS
1. Easy filling with powder or
paste.
2. Strong structure.
3. Low electrical resistance.
4. High porosity.
5. High mechanical strength.
6. Very high resistance to the electrochemical oxidation.
7. The uniform outside surface allows an easier cleaning after
filling of the powder.
8. Available in different tube profiles like circular, elliptical
square and rectangular. |
SPECIFICATIONS
| Semirigid Pluritubular Bag
Gauntlet obtained from 100% man-made fabric of typical weave, from
High Tenacity.The fabric is impregnated with a specially formulated resin. |
| Wall thickness
(finished tube) : |
0.30mm |
| Weight per linear meter of single
tubing : |
6.6gapox |
| Weight per square metre of
standard bad : |
700g/sqmt |
| Electrical resistance : |
0.30ohmcm |
| Tube bursting strength : |
36 Bars |
| Weight loss after 3 hours (Acid
resistance) : |
< 0.5% |
| Impurity release after 3 hours
reflux-chlorine: |
Nil |
DIMENSIONS
| 1 Standard internal
diameters : |
6.00 mm. |
| ( Tolerance : - 0.0 mm : |
7.24 mm. |
| + 0.1 mm ) : |
8.00 mm. |
|
8.40 mm. |
|
10.00 mm. |
| 2 Width ( tolerance : ± 2.0 % ) |
As Req. |
| 3 Tube pitch ( tolerance : ± 2.0 % ) |
" |
| 4 Number of tubes : |
Unlimited |
| 5 Maximum height of bag
(tolerance : ± 0.5mm) : |
960mm. |
| 6 Lateral finish : |
T,C,IS,IS |
ABOVE INFORMATION IS BASED ON OUR PRESENT STATE
OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR
PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS
GUARANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR
SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY
AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION. |
|
