Products
FINISHING
VARNISH FV 5450
FV 5450 is a Silicone based Anti tracking finishing Varnish of thermal class H .It dries tackfree at room temperature. However it should be cured at high temperature to develop best results.
FV 5450 contains specially selected heat resistant red pigment .It provides excellent moisture resistance and track resistance and resistance to organic chemicals.
FV 5450 is recommended as finishing varnish for Traction Motors , Large Electric Machine and Turbo Generators.
COLOUR |
Red |
SOLID CONTENT |
50 % |
| SURFACE DRYING (0.05 MM,AT RT) |
2 hrs (Tack Free) |
| CURING CYCLE |
100 C 2 hrs followed by 170 C 16 hrs. |
VISCOSITY ( Ford B 4 Cup at 25o C) |
40 - 90 Sec |
| VOLUME RESISTIVITY |
1013 Ohm.cm |
| DILECTRIC STRENGTH AT RT |
50 Volts/micron |
SHELF LIFE |
6 Months at 25o C or below |
TYPE |
Silicone |
| THERMAL CLASS |
Nearly H |
| CTI |
220 Volts |
| TEST METHOD |
60464:2 |
ABOVE INFORMATION IS BASED ON OUR PRESENT
STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR
PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS
GUARANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR
SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY
AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION. |