 Products
EPOXY
RESIN LOADED PREPREG FLEECE
Grade 1420
MATERIAL
Epoxy Resin Loaded Fleece is made of Polyester Fleece coated on both
sides with B stage Epoxy Resin. It is suitable for interturn
insulation of poles of field coil of synchronous machines & can
also be used for compaction of rotor bars specially robel bars in H
V motors. Tape is suitable for class B/F application.
PROPERTIES
THICKNESS |
0.13 MM |
WIDTH |
1000 MM |
BREAKING LOAD |
10 KG/25 MM |
WEIGHT |
150 ± 15 GSM |
RESIN CONTENT |
60 % |
VOLATILE CONTENT |
2 % MAX |
CURING CYCLE |
1350 C 1 HR |
SHELF LIFE |
20oC - 6 MONTHS
5oC - 12 MONTHS |
| TEST
METHOD |
IEC 60626-2 |
Other withs on request
ABOVE INFORMATION IS BASED ON OUR
PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES
ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE
CONSTRUED AS GUARANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS
DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU
SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED
APPLICATION.
|
