Products

CONSOLIDATION PREPREG TAPE

Grade 1190

MATERIAL
Consolidation Tape is made from fine fiber glass fabric which is impregnated with epoxy resin in B stage. It is suitable for consolidation of coils of class F motors.

PROPERTIES

THICKNESS	0.10 MM
WIDTH	25 MM
BREAKING LOAD	25 KG/25 MM MIN
WEIGHT	130 ± 20 GSM
RESIN CONTENT	65 %
THERMAL CLASS	155o C
CURE SCHEDULE	160o C , 1 HR
SHELF LIFE	15o C - 6 MONTHS 5o C - 12 MONTHS
TEST METHOD	IEC 60371.2

APPLICATION

TAPE HAS HIGH LOADING OF EPOXY RESIN.DURING CONSOLIDATION PROSESS RESIN MIGRATES AND FILLS INTERSTICES BETWEEN COPPER CONDUCTORS AND INSULATION.

ABOVE INFORMATION IS BASED ON OUR PRESENT STATE OF KNOWLEDGE AND IS INTENDED TO PROVIDE GENERAL NOTES ON OUR PRODUCTS AND THEIR USES IT SHOULD NOT THEREFORE , BE CONSTRUED AS GUARANTEEING SPECIFIC PROPERTIES OF THE PRODUCTS DESCRIBED OR THEIR SUITABILITIES FOR A PARTICULAR APPLICATION .YOU SHOULD THOROUGHLY AND INDEPENDENTLY TEST MATERIAL FOR ANY PLANNED APPLICATION.

............................................................................................................................................................................................................................. Conducting Fleece Tape | Consolidation Tape | Conducting Varnish | Epo Nomex Paper | Epoxy Resin Loaded Fleece | Finishing Varnish 5410 | Finishing Varnish Fv 5450 | Pluritubular Gauntlet | Polyimide Kapton* Adhesive Tape | Polyester Adhesive Tape | Ptfe Coated Glass Fabric| Self Fusing Silicone Rubber Tape | Semi Conducting Tape | Silicone Cable | Silicone Elastomer Fiber Glass Tape | Silicone Elastomer Glass Sleeve | Siliconised Polyester Film | Terelene Braided Cord | Woven Polyester Tape